We recently did training on this in-house at a customer’s and wanted to share our adhesive knowledge regarding the book binding industry.
There is more than one way to put a cover on a book. This article will discuss traditional bookbinding, perfect binding, and tools and technologies manufacturers can use to improve production.
Traditional bookbinding, also called hardcover binding, involves making a book using a hardcover or thick outside ‘case.’
This process takes a few steps and starts by creating the outer cover or case. The cover is first created through a process called "case making,” which requires gluing and folding the cover material over a thick paper board.
Meanwhile, the interior of the book is printed page by page. These sheets are gathered and folded together. The pages are then sewn or glued into a ‘book block.’ A strip of cloth is added to the spine, where the book block will be glued to the case.
Once the cover and the book block have been made, it’s time to put it all together! The book block is then glued to the case in a process called ‘casing in.’ Once attached, you have a hardcover bound book ready to put on the shelf.
There’s more than one type of adhesive to use when binding hardcover books. We’re going to cover the big three.
Gelatin glue, or protein glue, is used in many everyday applications, such as bookbinding, game board manufacturing, packaging, woodworking, and more. Yes, it is derived from protein, but modern gelatin is created by recycling pharmaceutical netting.
Today, gelatin glue is still used in the manufacturing of hardcover books and by historians to preserve older volumes created using protein-based adhesives. Gelatin glue comes in and out of popularity with bookbinders, but it is returning to vogue for the following reasons.
Hot melt adhesives are solid, polymer-based glues that do not contain solvents or water, allowing them to dry and bond quickly. Since hot melt is a thermoplastic, the glue stays in a solid state at room temperature and liquefies in the presence of heat.
While many companies use gelatin glue for traditional bookbinding, some have started using EVA hot melt because of its versatility and ease of use.
Liquid glues, or white glues, are water-based formulations used for a range of applications. They are popular with manufacturers because they are generally eco-friendly, non-toxic, and safe to handle. This type of glue also doesn’t need to be heated before application. Liquid glue tends to be popular for adhering the cover to the book block.
Depending on your application or production setup, one type of glue might work better than another for traditional bookbinding.
Perfect binding is commonly done using hot melt glues. This fast-drying adhesive provides a flexible bond. It’s recommended that hot melt be applied at around 350°F.
PUR glues are often used for perfect binding and function differently from other EVA and styrene butadiene rubber (SBR) hot melts. PUR glues polymerize when applied and form an incredibly strong bond compared to other hot melts.
PUR glue is a great choice for bonding difficult substrates and obtaining immediate tack, especially in bookbinding applications where traditional gelatin glues will not work. The glue provides superior flexibility and can withstand a larger range of temperatures.
To cure, PUR adhesive needs to sit for 24 hours. This type of glue bonds by drawing moisture out of the air and requires a specific equipment setup to prevent contact with the air during application.
A mil depth gauge will come in handy if you work with gelatin glue. This small tool measures how many mils of glue you're applying to your substrate. It will ensure you're not using too much glue, which can lead to warping, long drying times, and wasted glue.
Check out this step-by-step article to learn more about properly using a mil depth gauge.
For manufacturers using gelatin glue, a refractometer is a handheld device that measures the solids in the adhesive. Having the correct water-to-glue ratio is critical for application, as it helps with the consistency and performance of your production line and adhesive.
We have worked with many bookbinding manufacturers. If you have questions about what glue to use with your specific setup, we can help.